### WORK IN PROGRESS (nothing confirmed from that list yet) ###

– Upscaling Rules for Presets
– 3×3 Matrix

#########> What’s new/fixed in 0.19

Preview RC version !

1. GUI option to shut off the HDR infoframe from the output. (GUI as “Disable HDR” Just click that and no HDR infoframe reach the display even though the input has it.)
2. Handshake now solid for all K8500/UB900/SHIELD situation.
3. Res switching and handshake solved.
4. Both Normal and 200% DPI GUI available
5. Added Reset Button
6. remaining 1080i issue, work underway.

########> What’s new/fixed in 0.18

1. Major test release: Should address K8500 Netflix issue and all others reso/hdcp change issues.
Internally, the Fw has new routines to handle those situations.

2. Custom HDR and Custom AVI now survive powercycle. They are saved and automatically applied again upon powerup if they have been enabled via GUI.
One must excercise cuation especially with the custom AVI since it can results in blank screen if done incorrectly.

#######> What’s new/fixed in 0.17

1. Fixes the source BT2020 <> 709 color space change from the source when no other resync event happens

######> What’s new/fixed in 0.16

1. Added 2 new autopreset 4k30 8/10/12 -> 4k30 422 12 300MHz and 4k60 600MHz -> 4k60 420 300MHz. This is great for typical 300MHz PJ (like UB and TW series from EPSON) so that all HDR is output as 422 12 bit 300MHz except 4k60 422 12 bit 600MHz which comes out as 4k60 420 8bit 300mhz (HDR lost at 4K60 due to 300MHz BW limit).
This preset is also added to the Quickpresets selection and the list is now as follows: The number 2/3 are new.

[Quick Preset Selection]
1. Normal operation, clear all 4k30/4k60 presets, clear all deepcoor/colorspace to defaults.
2. Set 4k30/4k60 presets for a 4K30 deepcolor PJ > 300MHz (e.g Wireless Espon) [4K30 all -> 4K30 all, 4k60 600MHz -> 4k60 420 300MHz]
3. Set 4k30/4k60 presets for a 4K30 deepcolor PJ at 300MHz (e.g Wired Epson) [4k30 8/10/12 -> 4k30 422 12 300, 4k60 600MHz -> 4k60 420 300MHz]
4. Set 4k30/4k60 presets for a 4k60 420 300MHz TV [4k30 8/10/12 -> 4k30 8, 4k60 600MHz -> 4k60 420 300MHz]
5. Set 4k30/4k60 presets for a 4k30 8-bit 300MHz TV [4k30 8/10/12 -> 4k30 8, 4k60 all-> 1080p60 444 8/10/12]
6. Set 4k30/4k60 presets for a 1080p60 TV [4k30 8/10/12 -> 1080p30 8/10/12, 4k60 all-> 1080p60 444 8/10/12]
7. CS follow / DC follow
8. CS 4:4:4 / DC follow
9. CS 4:2:0 / DC follow
10. CS 4:4:4 / DC 8 bit
11. CS 4:2:0 / DC 8-bit

#####> What’s new/fixed in 0.15

1. 4K60 4:2:2 deepcolor from PS4PRO (possibly others sources) fixed.
Fix might help on 4K24/25/30 4:2:2 deepcolor too (please try and report back)
Note that GUI still report 8b as there is no general control packet sent by PS4PRO.

####> What’s new/fixed in 0.14

1. DD+/Netflix and others audio fix.

###> What’s new/fixed in 0.13

1. Input switching from the push button fixed

2. EDID 5.1 tables moved to the end of the list (First 25 Banks, similar to Integral)

3. The BT2020 clipping issue solved when input is 4:2:2

4. Added AVI infoframe TX disable for advanced testing (advanced users only)

5. 1080p60 Deepcolor upscaling resulted in > HDMI2.0 limit. Fixed

6. GUI 422 deepcolor pixel clock results fixed

7. Cleaned GUI reporting during mode changes.

8. If GUI connection lost, error message is displayed

##> What’s new/fixed in 0.12

1. Bitstream fixed. now support Dolby Atmos / TrueHD / DTSMA / …

2. PCM multichannel channel mapping fixed

#> What’s new/fixed in 0.11

1. Added “Display Name” information.
Provide Sink device name information to the Linker GUI.

2. Added “Sink EDID Limited” warning message.
When this text appears it means that Linker has detected the current incoming signal from sources exceed the connected display maximum capabilities.
Linker now automatically reduces the resolution to the first supported. For example, If incoming signal is 4K60 444 600MHz, but TV EDID says it can do MAX 4k60 420 300MHz, Linker will change chroma automatically.

3. Added “Ignore EDID Limits” checkbox.
This is then the override button for the above mentioned. It seems to be often the case that TV EDID advertises more limited capabilities in EDID than is actually the truth.
It is likely so that TV works “better” and cables can be longer. Customer will never really know if it is 4k60 444 600MHz or 4k60 420 300MHz because all the TV will say is “2160p” in the info.
Dirty games being played by big manufacturers. Anyway, with checking this box there is no more automatical downscaling/chroma sampling.

4. Added 4k60 and 4k30 Presets with Targets.
There are two new preset settings: 4k60 and 4k30. These are selected using the checkbox. Then in the pull-down menu are the targets (what should happen if the input is either 4k30 or 4k60).
For example, using these it is possible to force 4k60 444 600MHz -> 4k60 420 300 and simultaneously all 4k30 10/12bit inputs -> 4k30 8bit 300MHz. This solves X1S and content dependant source headaches.
Also you can choose 4k60 444 600MHz downscaled to 1080p60. Very convenient. Other example: xbox one s 4k24 10bit HDR movie is converted to 4k24 300MHz so that a 300MHz TV can show picture.

5. Moved the BT2020 force output to the HDR/AVI page. Its more relevant there.

6. Added “CONFIG” page where the LED control and the factory resets are

7. Added LONG RESET press (10seconds) which does the factory reset to the unit.

8. PCM Multichannel audio issue solved

9. Added 5.1 EDID tables.

10. Modified the quickpreset order. This is activated by holding RESET and clicking INPUT. Now the clicks are:

1. Normal operation, clear all 4k30/4k60 presets, clear all deepcoor/colorspace to defaults.
2. Set 4k30/4k60 presets for a 4k60 420 300MHz TV [4k30 8/10/12 -> 4k30 8, 4k60 600 -> 4k60 420 300]
3. Set 4k30/4k60 presets for a 4k30 8-bit 300MHz TV [4k30 8/10/12 -> 4k30 8, 4k60 all-> 1080p60 444 8/10/12]
4. Set 4k30/4k60 presets for a 1080p60 TV [4k30 8/10/12 -> 1080p30 8/10/12, 4k60 all-> 1080p60 444 8/10/12]
(5-9 are unchanged from before)
5 – CS follow / DC follow
6 – CS 4:4:4 / DC follow
7 – CS 4:2:0 / DC follow
8 – CS 4:4:4 / DC 8 bit
9 – CS 4:2:0 / DC 8-bit

Note on X1S: Xbox One S cannot playback DTSMA or TrueHd 7.1 bitstream. We now know that Xbox is not good currently with audio, it downconverts truehd/dtsma into dolby digital and DTS.
That is why you can see on your TV info that bluray track is supposedly sending TrueHD but AVR is still saying just Dolby D 5.1 because of this downconversion.

*****************\ www.HDfury.eu /*******************

Need a discount code ? Share a link to us, write a review,
tell people on any forum how cool we are and you will be rewarded with discount code!
the more you do, bigger will be the discount, do something amazing and get a FREE HDFURY!