Getting Started with HDfury Linker
No HDMI 2.0? No HDCP 2.2 input on your sink? No Problem!
Play HDCP2.2 protected content such as movies, games, satellite/cable, and internet videos on any Sink/AVR/TV/UHDTV/Projector or Monitor!
HDfury Linker allows you to view HDCP 2.2 content from your Sony 4K media player, your Shield game console, your graphics cards, your UHD Blu-Ray player, satellite/cable or via Netflix or internet sources on all standard HDMI or DVI-D displays without HDCP2.2 compliant input! Simply by converting HDCP2.2 to HDCP1.4 as allowed by DCP
If your TV, monitor or projector cannot play HDCP 2.2 content because it lacks of a HDCP 2.2 compliant input, UHDR KEY will solve your issue!
Upgrade to Perfect HDCP2.2 for a fraction of the cost of buying a new display!
The Ultra HDR KEY supports every HDMI signal and HDCP revision type in existence today from SD to Full HD and up to 4K60 4:4:4 600MHz. It is firmware upgradable so that new features can be added in the future as needed!
How difficult is it to set up?
A few switchs on the HDfury Linker can be set once depending on the HDMI/HDCP revision required by your TV. No other setup is required.
For more information download the User Manual from the Download Tab above.
Just connect the HDfury Linker between the source and the TV/projector. That’s it!
Which AVR, Sink, projectors and TVs are supported?
Any standard 50/60Hz or 100/120Hz HDMI or DVI-D sink will work with HDfury Linker.
Linker is the world first solution that work with any HDCP revision sources and any HDCP revision displays and guarantee you that, no matter if your display is HDMI/HDCP 1.4 and your source is HDMI/HDCP 2.2, you will always have the best possible picture. Thanx to our embedded unique Scaler with HDCP Doctor feature, you will be able to display any HDMI/HDCP revision sources on any HDMI/HDCP revision displays at their best capabilities. ALWAYS & GUARANTEED!